Fabulously relaxed glamour in these stunning pants, designed
for a drapey pants-weight fabric...try a fluid washed linen,
heavy rayon blends, single or double knits or heavy crepe.
Relaxed-fit straight leg pants sit around 1” below the natural
waist and feature a drawstring waist with fly front zipper.
Side seam pockets are topstitched down. Pants finish with a deep
hem; optional buttoned tab allows the pants to also be worn rolled up.
These are the perfect relaxed Pants and an essential addition to your
HotPatterns wardrobe... relaxed at the waist but sleek over the tummy,
hips and derriere. Make them in crepe and wear with a sequined tank
for a modern night-time look; try them in a slouchy, fluid linen with a
drapey knit top and soft jacket for everyday chic, or wear them in a
stable cashmere knit with a matching Tshirt for superior lounging gear.
Sizes 6-8-10 need around 2 1/2 yards/ 2.30 m of fabric;
sizes 12-14-16-18 need around 2 3/4 yards/ 2.55 m of fabric;
and sizes 20-22-24-26 need around 3 yards/ 2.75 m of fabric.
All sizes require 1/4 yard / 23cm lining; 1 x 7”/ 18cm zipper;
5 x 5/8”/ 1.5cm buttons; and scraps of lightweight fusible interfacing.
If you wish to use elastic at the waist, you’ll need 1” / 2.5cm wide elastic,
enough for 2/3 of your waist measurement.
All fabric amounts are for 60”/150cm wide fabric
Posted by Unknown on 10th Aug 2013
The pant design is really quite nice. They look great and fit well, after adjusting, but the directions are horrible. I have sewed quite a lot but it had been awhile since I made pants, so I needed a bit more help and explicit directions that what were provided.
Posted by tamara on 7th Jul 2013
I made these pants and for the most part I really liked the instruction. There were a couple of areas where I thought the instruction could have been clearer - simply by indicating the right and wrong side of the fabric on the illustration. It probably didn't help that my muslin looked the same on both the right and wrong sides and this is the first pair of pants that I've made in a very long time with a multi-part waistband and zipper. I am a returning sewer and still I was able to make a really nice pant. The couple of things I didn't like about the pattern is my first one turned out to be very high waisted. Not at all fashionable. I did go back and take the waistband off so that I could place it lower on the pant. This helped some. I also found that the pockets, when top stitched to the pant looked (to me) to be very large. I made the side 6 so I don't know if the pockets should also be scaled down. Perhaps I'll try that on my next pair.
Posted by Kathy on 4th Sep 2012
Oh, how I love these pants. The only reason they get 4 instead of 5 stars is because the pattern itself could have used more details to help the “advanced beginner”. I'm wearing the pants at work right now, and they're sooooo gorgeous! I've been sewing my own clothes for about a year now; I have a 35" inseam and extra-long arms, too, so I just lengthen patterns to fit. I have made about 9 pr. of pants - mostly from the usual manufacturers (McCalls, Burda, etc. - ones with VERY detailed instructions.) I fell in love with HotPatterns earlier this year, though (because they are SO MUCH MORE STYLISH than ANYBODY ELSE!!!), so I bought this pattern, just knowing I'd love the pants, even though I expected a little trouble with the pattern itself (I had made the Weekender Track pants and struggled some with the less-than-detailed instructions.)
For this pattern, I ran into some issues where she obviously assumes the sewer is smarter than I am (no comments from the peanut gallery.) It could have been that I was thinking too hard and needed to just take a step back, however. Bottom line is I could have used a little more guidance with the waist area and the right side/wrong side (of fabric), as well as right side/wrong side (of pant - like am I looking at the right side of the fabric on the right side of the pant? or the wrong side of the fabric on the right side of the pant? AGH!); I also had some problems with what to attach to where at what point on the waist pieces with the same right/wrong and top/bottom of waist issues. The one pic in the instructions where you attach the full waist unit to its copy (without the buttonholes) made my eyes cross and could have used some arrows or shading to indicate that the thing needs to be FLIPPED, not placed directly on top of the other piece. …Or something more useful that makes more sense. That waist confounded me for a good long bit. Once I stopped looking at the pic and started using my own logic (yes, I do have some), I figured out what I needed to do. In addition, I've never put a pair of pants together in the way you have to with these (because of the pockets), and it took me 3 --yes, 3-- un-doings of my inside-of-pant-leg stitches to get the inside of the crotch to NOT look like a jumbled blob of fabric. I'm so used to the 'attach-the-sides and then the crotch' way, that my brain just COULDN'T figger it out that I had to do the BACK crotch first, then attach the inside legs. Another thing that I think ALL patterns could use is the “if you’re going to finish your edges (say, with a serger), finish *THESE*edges, and leave *THESE* edges unfinished until you attach *THESE* together” sort of thing. Luckily, I figured that out when I did the muslin.
My personal opinion, once I put the muslin together, was that the zipper was completely unnecessary, and a bunch of extra work, so I just made a faux fly instead. My next pair will not have a tie, either, as it adds too much bulk in the front of my waist, and forces me to wear a loose shirt to hide the wad of fabric from the bow in the tie; since these hang so nicely, I want to show all that I can with a slimmer-fitting shirt! I also had to add about 8 inches to each side of the tie in order for it to be long enough to be tied (without strangling my waist). I'll just do full elastic on the next pair and skip the ties altogether.
Let me repeat that these pants are FREAKING FABULOUS. They just have this 'neat, clean' look to the drape that my other loose, comfy (tie-waist) pants are missing. I made a size 14 (for my big butt) in mid-weight linen, used an old pillowcase for the pockets (those came out SO CUTE!), and I look like a skinny supermodel in these bad boys; my hiney looks GORGEOUS. I will be making at least two more pairs of these, for sure, now that I've figured out the parts that were stumping me! HotPatterns has the most gorgeous products out there, and I will continue to buy them over and over again! I use them to learn, as well as to create my super-stylish wardrobe pieces!